The progress reports Each week we update this page with new photos of instruments in progress. The updates will usually be sometime on Monday, which is the end of our work week. We hope that you enjoy seeing the progress on your instrument and those of others who have them on order. |
||
Week ending February 17, 2003
We did a little yardwork on Thursday, since the sun was shining: here's the bank of the little creek before we removed the blackberries.
This is what it looked like afterward.
LB4: fitting the braces into the linings
: VG36: the tail block for the keybox
VG37, VG39: the blanks for the handles - VG37 is at right, the dark wood
VG37: the finished handle on the lathe
VG37: gluing on the tailpiece
VG37: a stack of desert ironwood strap button blanks, including the ones that will be used for VG37
VG37: the drone pins and the tirant peg
VG37: the chanter bridge is on, the shaft and bearing are fitted, and the wheel is in
VG39: all masked and ready to finish
VG39: the first coats of finish being applied
VG40: the channel is cut, the purfling is in, and the binding is in progress
The Pajot: the shaft is ready
The Colson: using a wiggler to position the crank for drilling out the old shaft
The Colson: the old handle shaft, the crank, the new handle shaft, and the original handle
Justin introduces us to yet another tool that we just must have: a portable metal-cutting bandsaw. See other weeks for more pictures. Please contact us if you have comments or questions about this page or other pages on this site.
Alden and Cali Hackmann © Copyright 2000, 2005, Olympic Musical Instruments.
|
||